fix your slow WiFi : The 802.11n routers are most likely to stick around for many more years even though the 801.11c launch has been announced. Unfortunately, the 300 Mbps that the n-standard promises to deliver is not at all close to it and proves to be a massive problem for connections labeled as 50/100 Mbps and more.
Wi-Fi congestion problems are common in apartment complexes or high-density neighborhood. There might be some causes of it. A region a may have some radio station towers which shoots an invisible wave of radiation known as “frequency” from the tower to your radio. Just like the radio, Wi-Fi is also an invisible form of radiation. Also, there are multiple kinds of Wi-Fi frequencies used by computers namely 2.4GHz and 5GHz.
How to fix your slow WiFi?
The problem is that most consumer technologies including Bluetooth and several WiFi technologies use the same 2.4GHz frequency. To add to it, the 2.4GHz possesses a long range which leads to some different Wi-Fi signals trampling over each other.
If you are facing problems with your Wi-Fi speeds and do not want to go back to using cabled connection, we have a few tricks and tips that will help you boost weak signals.
- Check your router’s eco settings:
Most of the routers are set up with their “Power Savings” mode ON by default. This is done to save a few milliwatts. This method does reduce the bandwidth disproportionately. The ‘low’ settings lower the power output of the router but also reduces the bandwidth.
If you value bandwidth over minimal power savings, then you can configure your router’s settings. All you have to do is look for entries called “Transmission Power” or various eco modes and turn them off.
Also, there are chances that your router sports some “Automatic” transmission setting. Just turn them OFF and enjoy maximum output from your device.
- Overcome the law of Physics:
There is an excellent chance that the legislation of Physics stands in the way of decent wireless bandwidth and the signal strength. The distance between the router and wireless adapter is a relevant factor. So if you just double the distance between the router and the client, then you can expect the throughput to shrink to one-third of its original value. Setting up a wireless repeater, in this case, will boost your signal strength noticeably.
In addition to this, it has been found out that there are some signal killers that stand in the way of the throughput. Water and metal are such two objects that act as signal killers. Water serves as a blockade for almost 2.42GHz signals, so the best thing is to clear all the objects that contain any form of liquids out of the way. Radiators and flower pots are some typical examples. Also, you need to be sure that no metal objects are in the way of the router and clients. Metal furniture, metal boards, etc. must be moved out of placed accordingly. This is because the smooth and shiny surfaces reflect signals and create a drop in the signal strength.
- Upgrade your router’s antenna:
A delicate antenna design can also be the primary cause of packet loss or weak throughput. You can overcome this problem by replacing the built-in antenna with something that is much more powerful. The process is a bit tricky but can make the difference between the slow connection and a fast line to your router.
Depending on the setup, you can either opt for an omnidirectional antenna or a directional antenna. The omnidirectional antenna will scatter the signals throughout the home or office. A directional antenna, on the other hand, is useful if the devices that are in need of a good throughput are in a same room or place.
- Figuring out the best spot for WiFi:
You can always make use of a Wi-Fi heat-mapping tool to measure the impact of distance, frequency changes and building structures based on the signal strength. There are a couple of tools that work quite perfect namely NetSpot for Mac and Heatmapper for Windows. Using any of these tools will allow you to track Wi-Fi coverage in your office or home building. We are going to provide you and example of how the app works.
Read : Free vpn apps on iPhone
After you have installed the software, open it and type in a new “Site Survey” name and click “Blank Map.” Also, you can select the floor plan of your office or home building to get the accurate map. We tried out and suggest you select the “Draw Map” feature and begin withdrawing your floor plan.
The next step is to define the scale by determining the exact distance between two spots on the map. Now click “Let’s get started” and just walk around the area on the map. Begin with clicking the spot on the floor plan that you are currently standing on.
Scan some points to get a more accurate Wi-Fi heatmap. Once you are done, you will get a map that shows you signal strengths on various times and also the throughput of the Wi-Fi network.
- Varying CPU frequencies:
The motherboard of your computer is also working in the “Gigahertz” spectrum. The noise made by it can be picked up by your built-in Wi-Fi transmitter. The higher the noise made by the computer, the more likely it is that your wireless adapter will lower the bandwidth automatically by reducing the link-rate to avoid frequency interfaces.fix your slow wifi
The CPU’s these days clock dynamically which is the main reason why Wi-Fi adapter needs to adapt the link rate continually and thus causing the variation in Mbps and dropped connections on many occasions. The Wi-Fi adapter in laptops is built close to the memory and CPU bus which causes the problems in some devices.fix your slow wifi
All these issues depend upon the design of your device and placement of Wi-Fi adapter. If the symptoms sound familiar to you, then you can always solve the problem by connecting an external adapter. Some of the adapters even come with a little stand and a connecting USB cable. So maintaining the distance between the Wi-Fi adapter and CPU noise will more likely help you out.
- Firmware or Driver issues:fix your slow wifi
Always make sure that your router’s firmware is up to date especially while buying a new one. Always look for the latest model equipped with the latest technology. You can also go for a firmware update to increase the bandwidth, feature set and resiliency to signals. Also, make sure that your Wi-Fi adapter is up to date. Some Dropouts, Standby issues, and low-performance issues might be fixed in the next 0.1 release of your adapter’s driver.fix your slow wifi
The normal driver delivery via Windows update has gotten better in the recent years but will rarely get you the latest and greatest driver. So for that, the first place you need to go is manufacturer’s support page. In case their driver area is not well maintained, you can always go to chipset maker’s website for help. All you need to do is head over the support page and enter your email address to get some drivers.fix your slow wifi
Read : Speakers for House party
- Choose the right channel:fix your slow wifi
Always keep this in mind that the day your router is set up, it automatically detects the least crowded channel and makes it as the default channel. But there are chances that with the arrival of new neighbors or offices in nearby place, a single channel may be used by some routers while the other channels remain deserted. The InSSIDer will be of help to you.
This tool analyzes your Wi-Fi spectrum and provides you with details regarding the home network as well as channel usage. You can always look for your channel and jump to an unused one to improve the latency and throughput noticeably.
- Use your router’s 5GHz network:fix your slow wifi
The 2.4GHz frequency is always crowded because of many neighbors using the same frequency along with small monitors, cordless phones, microwave ovens and much more. The modern 802.11n routers offer “dual band”, which means that they send two network signals.
One of them is at 2.4GHz and the other one is at 5GHz which is far less crowded and offers many more channels. Many device makers these days decide to save on Wi-Fi chips and go only with the 2.4Ghz receivers. So you can do the smart work by activating both the networks and connect the mobile devices to 2.4GHz network and save the 5GHz network for laptops and desktops.
- Limit your router’s frequency band: fix your slow wifi
Many a times, you cannot choose to have the 5GHz frequency band or selecting a rather less used channel. In such cases, you can limit your router to send out signals at intervals of 20MHz. All it will do is reducing the overall throughput a bit but on the other hand give you a stronger signal with fewer dropouts.
So, these were some of the simplest ways to fix any slow WiFi’s speed anytime without putting many efforts. It may happen that the initial tricks may not help you in fixing your slow WiFi speed, however, if you keep trying all the tricks mentioned above, at least any one of them will surely work 🙂